✔ WATER TUBE LEVEL (from Scraps) ✔
by marcellahella in Workshop > Tools
45574 Views, 169 Favorites, 0 Comments
✔ WATER TUBE LEVEL (from Scraps) ✔
This is a super easy and fast to make tool and it is 100 % recycled.
This water level is really useful for example when you need to paint a room of two different color horizontally, or you need to find the same level of two things far apart from each over, like two shelfs, or two paintings.
This water level is really useful for example when you need to paint a room of two different color horizontally, or you need to find the same level of two things far apart from each over, like two shelfs, or two paintings.
WHAT YOU NEED
You only need two small transparent plastic bottle, a used bike tire (without any holes) and a pair of scissors.
CUT THE BOTTLES
Cut the bottom part of the plastic bottles.
CUT THE INNERTUBE
Cut a piece of the inner tube, long as you need it.
ASSEMBLE IT
Place each open side of the inner tube in each neck of the bottles (like in the photos)
FILL IT WITH WATER
Fill one of the bottle with water, keeping the inner tube without any fold and the over bottle at the same level.
DONE
Is ready!
Is easier to use in two people (or otherwise you need to make an hole in one of the bottle and hang it up on a neil on the wall).
Hold them both FIRM on the wall for few second and mark the water level with a pencil.
The water level is always constant (communicating vessels principle).
Is easier to use in two people (or otherwise you need to make an hole in one of the bottle and hang it up on a neil on the wall).
Hold them both FIRM on the wall for few second and mark the water level with a pencil.
The water level is always constant (communicating vessels principle).