$0 Phone Stand

Do you need a phone stand? But your too cheap to buy one with your own money!!! I got the solution for you.

The first step is to FIND some scrap 2x4, or 2x6. Something that is 1.5 inches thick.

Cut the wood in to smaller cubes on a scroll saw, table saw, miter saw, or a bandsaw. I uses a scroll saw for everything.

Lightly sand the cubes with a belt, or disk sander.

On the saw if your choice cut out a shape similar to the one in the picture.

Sand the pice in till it's comfortable in your hands.

This step is optional. You can put some stain, wax, or lacquer on it to make it nicer. I used wax.