1lb Gummy Bear

Back again with another instructable this time I will show you how to make a giant gummy bear.  This instructable was requested by my wife.  The steps are roughly the same as the Gummy shot glass which can be found here: https://www.instructables.com/id/Gummy-Shot-Glass/

You will need the following for this:

• 12 oz. of flavored gelatin
• Eight 1/4 oz. packages of unflavored gelatin,
• 1 1/3 cups of hot water
• A bear cake mold (I had a small one that cost about $6 at a cake shop near my house)
• Corn Starch (to prevent sticking)

With the following recipe I was able to make a 1.2 lb gummy bear.

1. Place 1 1/3 cups hot water in a small sauce pan. Pour the Jello and unflavored gelatin over the water. We will have a saturated mixture that is very thick an grainy
2. Let sit for 5 minutes.
3. Place sauce pan over medium heat and stir until gelatin is dissolved completely, about 5 minutes.
4. When mixture is liquid and all gelatin has dissolved, remove from heat.
5. Let cool for 3 minutes and then pour into the bear mold.
6. After the bear is poured put it in the fridge on a plate for about 60 min
7. When it has solidified carefully remove it from the mold.
8. To prevent them from sticking, put a small amount of cornstarch in your hand and rub it onto the gummy bear so it will not stick in the bag you will store it in