2 Car Small Garage Workshop

My tiny structure is a car workshop where people can go and learn a lot from life lessons to lessons about car building.

I picked a car workshop because one I love cars and two a car workshop is where a lot of things happen especially life lessons and memories. People can learn a lot in a place like that. they can learn about cars or they can make memories there with different people like friends or anyone who ever you want to share moments of happiness when you fix a car and make it run again.

making a garage where its small enough where a car can drive in but big enough where a second car can be stacked on top using a hydraulic lift

1. popsicle sticks
2. paint
3. paper
4. foam
5. computer
6. fusion 360
7. hot glue gun
8. glue sticks

I started by making the object in Fusion 360 creating the walls and the outside. Making the shelves in there and making the hydraulic lift, and the pinboards on the left and right walls. then came making the lights on the top of the design, and finally making the wood panels on the outside of the garage.

then started making the actual building, I started cutting out a 5 inch by 5 inch square and I made 4 of those and put popsicle sticks in the middle like the pillars in the Autocad design, and adding the horizontal panels with the popsicle sticks to make the wood panels and also cutting out the 2 windows, and glued them to the foam which is 10 inches by 30 inches and made the shelves out of wooden popsicle sticks to make the shelves and I glued them with hot glue to the base.