2016 Suzuki GSX-RR 1:8 Racing RC MotoGP

This is a brand new motorcycle. It builds upon the knowledge gained with my previous bikes, but where those were a proof of concept, this is the final product.

This 1/8 size Racing Motorcycle is far more advanced and has been completely redesigned with knowledge gained from actual RC motorcycle designers and racing enthusiasts whose invaluable input was incorporated into the design. This is not meant to be a good 3d printed RC motorcycle, but a serious new RC Motorcycle variant that people can build, design and race at the track.

Built and Engineered by:

Brett Turnage

bti3dlabs.com

@3dprintracetech

NOT JUST BIGGER, BUT BETTER—COMPLETELY REENGINEERED AND REDESINGED!!

Every part of the bike has been redesigned, and re-imagined to make this bike stronger, more robust, more realistic, to make this RC motorcycle drive, lean, and use rubber tires.

1/8 SIZE

Building this bike to an industry standard size allows the use of off the shelf parts, dampers, shocks, wheels, and tires.

MORE REALISTIC!

Different color combinations that mimic the rear Suzuki race bike livrey.

CHOOSE YOUR RIDER

You have two choices of number plates #25 (Maverick Viñales) and #41 (Alex Villà), so you get to decide who you want to represent!

REDESIGNED BODY

The body was redesigned to make the bottom of the bike narrower to allow maximum lean.

DESIGNED TO BALANCE

All of the weight is tucked in towards the center of the bike to allow it to easily balance.

THE STEERING HAS BEEN CHANGED

A spring loaded servo linkage has been added along with a dampener for smooth steering input.

BOLTS NOT GLUE

Unlike my other 3d vehicles, this bike relies on bolts rather than glue. This makes the bike easier to build and maintain, and it aids in the bikes strength.

BUILT IN THREADS

Fusion360 gave me the ability to add threads to the design so the holes print with holes already tapped. (cleaning up the treads with a tap is still recommended)

ROBUSTNESS

This bike was built with crashing in mind. Parts are bigger and the body parts are one piece so it can withstand crashing and rolling over.

INNOVATIVE CHASSIS

This new bikes has a chassis that the body parts bolt onto just like a real bike. The bike can be broken down to the chassis in less than 5 minutes by only removing 9 bolts. This allows easy maintenance, tuning, and testing.

55MM REAR ADUSTABLE SHOCK

Bigger rear shock for better dampening.

ADJUSTABLE GEOMETRY

You can adjust the ride height, steering angle, rear shock ride height, rear shock mounting position, front fork angle, and even the camber of the rear wheel.

METAL RACING FRONT DAMPNER

Racing front dampers are used in the front forks because this bike was meant to use serious racing parts.

WIDE SELECTION OF RUBBER TIRES AND WHEELS

The last bikes suffered in the lack of available rubber motorcycle tires, not this bike… any 1/8 tire or rim will fit and can be used. From 3d printed rims with Kyosho rubber Tires, to GPV-1 tires, to even GRP’s carbon rims and super sticky tires. The bike can be configured in with a regular rear rim or even use a mechanical gyro in the rear if you are new to driving an RC motorcycle.

Weight 770 grams/1.7 pounds

1:8 Suzuki GSX-RR Manual

Rider Assembly Manual

Link to STL files on google drive

It's recommended that you use a 3d Slicer that allows you to place your supports like Simplify3d.

The parts are orientated so that the print layers align so you get a nice finish.

If you have a heated bed:

Print PLA @ 60-70 C

If no Printed Bed:

Use a bed material like Printinz Bed Plate, build tack.

All printed parts were printed at 100% infill to add to the robustness of the bike.

Print Time with 1 printer: 2-3 Days

Assembly time: 1-3 hours

Colors:

Real Blue, Real Black, Transparent Yellow, Real Red, Real White, Metallic Grey/Metal

I used Solutech Filament because I find that their colors are very true and very rich.

Parts Needed:

Hitec HS-311 Servo

Servo Arm (Main)

Servo Arm (desired degree 62.2, 64.7, or 67.2 degrees)

Motor: 5500 kv or higher

*Step only needed if using Movable Rider

Steering Link Assembly - GPV1

Printed Steering Link Servo Mount

Racer's Edge Aluminum Pro Single-Sided Servo Horn for HiTec (Blue or Black)

Screw in the main body fairing with (4) m3 x 16 set screws.

Tank with m3 x10 flat screw

Rear Fender with (2) m3 x 8 button heads

Front Fairing with (2) m3 x 8 button heads

Alignment

Check that the wheels are inline by placing it on a ruler or a line, adjust the wheels with different spacers if needed.

Rear Wheel Camber

Check that the rear wheel is not angled... If it is adjust the rear wheel camber by adjusting the two m3 x 8 button heads screws and adjusting until it is completely vertical.

Balance

Balance the bike on the floor. Check and see if the bike can stand up and hold itself without falling over. If it cannot stand, check the wheels alignment and rear wheel camber.

Wide Selection of Rubber Tires

The last bikes suffered in the lack of available rubber motorcycle tires, not this bike… any 1/8 tire or rim will fit and can be used. From 3d printed rims with Kyosho rubber Tires, to GPV-1 tires, to even GRP’s carbon rims and super sticky tires. The bike can be configured in advanced configuration, or if you are new to rc motorcycles a rear mechanical gyro can be used as the rear tire.

Because this build is about the bike and the rider has remained the same, I'm going to leave the assembly of the rider to the manual pdf above, and keep the focus of this Instructable to the new 1:8 bike.

The Stand was designed to both hold the bike during service as well as holding it standing when you are attempting to start the bike.