Mosquito Trap With Ultraviolet LED | Fusion 360 | Pistacchio Graphic
by PistacchioGraphic in Workshop > 3D Printing
272 Views, 1 Favorites, 0 Comments
Mosquito Trap With Ultraviolet LED | Fusion 360 | Pistacchio Graphic
Look how easy is to make a Mosquito Trap on Fusion 360.
Follow the tutorial video:
Link to download the FREE Technical Drawing e-Book PDF:
https://pistacchiographic.gumroad.com/l/technicalebook
Follow my youtube channel tutorial:
Supplies
Software that was used in this project:
OBS Studio: Record the screen
Fusion 360: CAD design and PDF drawing instructions
Affinity Designer: Make the thumbnail
Affinity Publisher: Make the Technical Drawing E-Book
3 Ultraviolet LED
Mosquito Trap
On this tutorial you will learn how to design a Mosquito Trap on Fusion 360.
3 ultraviolet LED
Downloads
Suport LED
On this step we will use the Extrude and the Shell Tool on Create tap.
Follow the instruction technical drawing.
Downloads
Base Tread
Use the Extrude, Loft and Tread Tool on Create tab to make this part.
Downloads
Tap
Use the Tread Tool on Create tab to make the bottom cap.