Convertible Wooden Fidget Spinner | Shuriken / Slingshot / Screwdriver

In this instructable you will see how I built a 3-in-one fidget spinner made out of wood, some bit holders and a bearing.

Firstly, I cut the piece of wood in the dimensions I wanted.

After I designed the shape of the fidget spinner on the wood, I started cutting it with a jigsaw.

Then I sanded it, very well in order to give it the desired shape.

Now, with a 3mm drill bit, I drilled the five edges, in the middle, on the top side of the wood.

After that, I cut the bit holders at the right length and measured their thickness.

I drilled the holes with a 10mm drill bit and then with a router I started rounding all the edges.

Then, I sanded it again very well and gave its final shape.

Now, I removed the metal shields from the bearing and cleaned it with WD-40 in order to spin faster.

I measured the diameter of the bearing and I drilled a 22mm hole.

And I placed the bearing and the bit holders together with the piece of wood in order to see that everything fits right.

And I started placing the bit holders into the holes, one by one, using super glue.

After the glue dried up, I drilled every bit holder with the wood separately, placing a screw between them, so that the bit holders can’t be moved when I use the fidget spinner as a multi bit screwdriver.

I cut the screws with a hacksaw, sanded it again very well and the Fidget Spinner is ready for use!

Multi-Bit Screwdriver

Slingshot

Shuriken

Thanks for reading! I hope you liked it!

https://www.youtube.com/subscription_center?add_us...