3D-Printed Case for HTC One M8

Hey guys!

I liked the HTC One (M7) Case by briscoe28 (from Thingiverse) very much. So I made a similar one for the newer model M8. As a base model I used the HTC One M8 case by BDan (also Thingiverse). Thank you both very much!

I used a MakerBot Replicator 2X. You should use rafts and supports because of the curved back. I printed it with the back on the top to get a better surface there. But this means that you'll need even more supporting structures.

It would also be helpful to use WillowFlex or another flexible plastic.

And well, all you have to do is printing out the .stl-file with a 3D Printer of your choice and afterwards remove the supports!

Have Fun :)