3D Printed Customizable Hex Key Handle

This is a simple print-in-place tool to add leverge and comfort to a hex key of any size.

- 3D printer

- Hex key

- Slicer Program

Use the included link to print the handle from any fillament with a high infill and remove the supports. https://www.thingiverse.com/thing:4586077

Push the elbow of the hex key into the slot as shown until the key stops and the long part of the key is sticking out of the hole in the front. If the key does not stay in the handle or is too big, resize and try to print again.