3D-Printed Pick and Place Mechanism

The 3D-printed pick-and-place rotational mechanism is an innovative project designed to automate the task of picking up objects and placing them in designated locations with precision and efficiency. This setup leverages the versatility of 3D printing technology to create a compact, cost-effective, and highly functional robotic system suitable for various applications in both industrial and research settings.

The mechanism features a rotational design, which allows for a broad range of motion and flexibility compared to traditional linear pick and place systems. By utilizing rotational joints and arms, this setup can efficiently handle tasks that require precise angular positioning and movement. The system is driven by a combination of motors and control electronics, orchestrated through a micro-controller platform such as Arduino, ensuring seamless operation and programmability.

This project stands out for its accessibility and ease of customization. The components are designed using CAD software and printed using standard 3D printing materials, making it possible to prototype and iterate on the design rapidly. This approach not only reduces the cost but also allows for quick adjustments and enhancements based on specific requirements.

The primary applications of this pick-and-place mechanism include automated assembly lines, material handling, and educational robotics. Its ability to be programmed for various tasks makes it a versatile tool in any automation setup. The design emphasizes simplicity and robustness, ensuring that even those with limited experience in robotics and automation can build and operate the system successfully.

This project's novelty lies in its rotation mechanism, which is made as simple as possible with a slow slope semi-circular ramp combined with the semi-circle part at the end of the end effector that creates a 90-degree rotation for the whole mechanism.

Overall, this 3D-printed pick-and-place rotational mechanism embodies the principles of modern automation: adaptability, precision, and efficiency, packaged in a user-friendly and cost-effective solution. Whether for industrial applications or educational purposes, this project serves as a testament to the potential of combining 3D printing with robotics to achieve innovative and practical solutions

• PLA material: 200-300 g
• Dc motor 25GA-370-12V
• L298N motor driver
• Arduino UNO
• Bolts and nuts

1.1 Software Tools: During the initial phase, CAD software, specifically SolidWorks, was used to design the pick and place mechanism. The base, arms, joints, and end-effector were sketched to create a comprehensive model. All moving parts were designed with precise clearances to ensure smooth rotation and movement.

1.2 Component Specifications: The dimensions for each part of the mechanism were carefully defined, considering the size and weight of the objects the mechanism would handle to ensure appropriate scaling. PLA was selected as the primary material for 3D printing due to its ease of use, although ABS was also considered for parts requiring higher durability.

1.3 Design Considerations: Rotational joints were incorporated into the design to enable the required movements. The arms were designed with sufficient length to reach and manipulate objects within the intended workspace. Mounting points for motors and sensors were included, and the routing of wires and placement of electronic components were planned to avoid interference with moving parts.

2.1 3D Printing Preparation: The CAD designs were converted into STL files. Using Cura as the slicing software, the files were prepared for 3D printing, configuring settings such as layer height, infill density, and print speed based on the material used.

2.2 Printing Process: Each component was printed separately. The 3D printer was properly calibrated to avoid issues such as warping or layer shifting. The printing process was closely monitored to detect and correct any errors early, especially for larger or more complex parts.

2.3 Post-Processing: After printing, the parts were removed from the build plate and cleaned off any support material or rafts. The parts were then sanded and smoothed to remove any rough edges or imperfections, ensuring smooth movement and better fit during assembly.

3.1 Gathering Tools and Materials: All necessary hardware for assembly, including screws, nuts, bolts, bearings, and additional fastening components, were collected. Tools such as screwdrivers, wrenches, and pliers were also gathered.

3.2 Assembly Procedure: Following the CAD design, the base was assembled first, and then the arms were attached. Larger components were assembled before attaching smaller parts. Rotational joints were installed and their movement was verified to ensure they moved freely without excessive friction or play. The end-effector was then attached to the arm. Depending on the design, the end-effector could be a gripper, a suction cup, or another tool suitable for the intended application.

4.1 Electronics Setup: An Arduino microcontroller was chosen to control the mechanism. Connections for motors, sensors, and other electronic components were planned. The necessary connections were soldered, and the control circuit was assembled on a breadboard. Motor drivers were used to manage the power requirements of the motors.

4.2 Programming: The control code to operate the pick and place tasks was developed. The microcontroller was programmed to control the motors based on sensor inputs. The code was tested and debugged to ensure accurate movement and positioning, with feedback mechanisms implemented to correct any errors in movement.

5.1 Initial Testing: The mechanism was powered up and initial tests were conducted to verify basic functionality. Each part was checked to ensure it moved as intended and any mechanical issues were identified. The system's response to input commands was verified, ensuring that the motors and sensors functioned correctly.

5.2 Calibration: Control parameters were fine-tuned for precise movements. Motor speed, acceleration, and other parameters were adjusted to achieve smooth and accurate operation. The end-effector was calibrated to ensure it could pick and place objects accurately within the desired range.

5.3 Performance Evaluation: Repeated tests were conducted to verify the reliability and efficiency of the mechanism. The system was run through its full range of motions to ensure consistent performance. Final adjustments were made to optimize performance, including tweaking the code, making minor mechanical adjustments, and improving wire routing.