3D Tic Tac Toe

by mikeandmertle in Living > Toys & Games

289 Views, 6 Favorites, 0 Comments

3D Tic Tac Toe

3D Tic Tac Toe.png

This a fun little project you can make with your kids, it doesn't take a lot of skill and produces a game that helps children to develop their thinking to encompass 3 dimensions.

It plays out like conventional tic-tac-toe except you can get three in a row on the vertical axis as well, there are quite a lot of diagonal options you can use.

My Son helped build this game.

Supplies

  • Thin MDF Sheet
  • 20mm x 20mm
  • Wood Glue
  • Permanent Marker
  • Wood Stain
  • Spray paint (two colours)
  • Hole Saw
  • Saw
  • Drill
  • Tape Measure

Cut Out the Parts

3D TicTacToe.png
3D TicTacToe (1).png

Use a saw to cut out three squares from a piece of MDF sheet. You also need to cut four posts from the 20mmx20mm timber and saw the three notches into each of the posts.

Now sand all the parts down so all the edges are smooth.

Most of the cuts are easy to make with a hand saw and within the abilities of a child, though you will need to be a little more precise with the slots.

Make the Counters

20240628_164228.jpg
20240628_164256.jpg
20240628_164316.jpg
20240628_164341.jpg
20240628_164439.jpg

The easiest way to make the game counters is to use a hole saw to cut out the circles from a piece of MDF. However, you need to remove the centre drill bit from the hole saw first.

Since you are not using centre drill you need to be a little more careful to hold the wood still while using the hole saw to cut out the counters.

Once you have cut out enough counters you will need to sand down all the edges.

Stain the Playing Table

20200324_113412.jpg
20200324_113417(0).jpg

We used some decking oil to stain the MDF board, it's a lot easier to do this before the parts are assembled. This is a good activity for kids to help with, just give them a set up disposable gloves to keep them clean.

Once the stain is dry use a ruler and permanent marker to draw on the playing grid.

Paint the Counters

20240628_164543.jpg
20240628_164538.jpg
20240623_181905.jpg

Now use two different colours of spray paint to colour the counters, once one side is dry flip them over and spray the other side as well.

Assemble the Parts

20200326_131919.jpg
20240623_181835.jpg

The playing table is pretty easy to assemble, just use a small amount of wood glue on each of the joints and snap everything together. You may need to clamp this while the glue drys, or you can even use some tape to hold the supports in place.

Once everything is dry you can start playing.