3d Print Mold for Silicone Patch Label

Hello I print with my 3d printer prusa i3 mk3 a mold to make a label silicone patch, I discovered by chance that the wd40 was compatible with silicone and that it allowed to make it more fluent without altering the composition

this picture is a silicone i use for create this silicone patch.

material:

ACANSIL 3022 BASE.

CATALYST and WD40.

proportion about quantity

SILICONE 10 GRAMMES

WD40 2 GRAMMES

CATALYST 1.5 GRAMMES (RED is fast curing)

for yellow and other color i using Smooth-On so-strong

https://www.smooth-on.com/products/so-strong/

i mixt silicone in first and after add WD40 and catalyst

after silicone is mixted i put inside a mold and wait for one hours.

After one hour i preparing the grey color and put in the mold over the yellow color.

after waiting 3 hours ,unmold silicone patch :)

happy trying :)

i add original file stl