3d Printable 3Doodler Fillament

by Hyperlinks1 in Workshop > 3D Printing

790 Views, 3 Favorites, 0 Comments

3d Printable 3Doodler Fillament

Screen Shot 2015-05-15 at 10.40.50 AM.png

This is a 3d printable stick of filament for the 3Doodler. It is one foot long, and 3mm in diameter. It can be shortened for printers that do not have a build space of 1 foot.

I have not tested this. It is a possibility that it may damage your 3doodler. Use at your own risk.

Download

Screen Shot 2015-05-15 at 10.41.02 AM.png

Download the STL file and start printing.

Downloads

3doodler exp.stl

Dimensions

Screen Shot 2015-05-15 at 10.41.18 AM.png

The diameter of the filament is 3mm, and the height of the filament is 12 inches.

Finalize

Screen Shot 2015-05-20 at 10.10.04 AM.png

Make sure that the ends of the filament are flat (You can sand it down if it is not), and make sure there is nothing like extra filament sticking out the sides.

Doodle!

Screen Shot 2015-05-20 at 9.33.03 AM.png

!NOTE THAT THIS IS AN UNTESTED PRINT! USE AT YOUR OWN RISK! May DAMAGE 3DOODLER!

Now use this as a regular piece of filament!