3x3 Minecraft Piston Door

by timka3 in Living > Video Games

111511 Views, 13 Favorites, 0 Comments

3x3 Minecraft Piston Door

2018-01-25_19.16.24.png

Hey guys,

Today I will be teaching you how to build a simple Minecraft 3x3 piston door.

2018-01-25_19.00.20.png

Make a 5x5 square with a 3x3 hole in the middle, make sure that the square is 3 blocks above the ground.

2018-01-25_19.01.53.png

This is happening in the bottom left corner of the 5x5 square. First, create a dropper donut, so that each dropper shoots into the next one, with the top left one shooting its item into the hopper. Then, place a repeater and a comparator in the spots shown.

2018-01-25_19.02.34.png

Place a block, so that the comparator is going into the block. Place a redstone on top of that block, and place 2 more blocks so that it makes the L shape shown.

2018-01-25_19.02.52.png

On the block next to the redstone, place a redstone torch so that it should be facing off the 5x5 square. Then place a redstone torch under it, on another block.

2018-01-25_19.03.19.png

(Now we flipped over to the other side). Put a block on top of the redstone torch, and place the two other redstone torches as shown. Also, place a block on top of the top redstone torch.

2018-01-25_19.04.02.png

Next, place a sticky piston next to the piece of redstone. The piston should extend, and then place another sticky piston on top of the piston as shown. Make sure that you attach a block ONLY to the first piston.

2018-01-25_19.05.57.png

Under the extended block, place a repeater set to 4 ticks of delay. Then, place two pistons as shown.

2018-01-25_19.06.13.png

Place a repeater, set to 4 ticks of delay, so that it is facing the top piston block, and place two blocks behind the repeater with pieces of redstone on top of them.

2018-01-25_19.07.34.png

Next, place a row of blocks, as shown in the picture.

2018-01-25_19.08.56.png

Add pistons in the following way. They should be in the same "row" as the double extender pistons.

2018-01-25_19.09.18.png

Add redstone dust on the top as shown

2018-01-25_19.09.51.png

Now go back, and on the block where you placed your first piston, place another one with a redstone block attached to it as shown.

2018-01-25_19.10.14.png

Now make sure that the extended redstone block is feeding to a piece of redstone. Place a piston and a block as shown in the picture, with a repeater facing out of the piston head.

2018-01-25_19.10.26.png

Now add blocks with redstone on top of them as shown in the picture, you should only need to place one redstone, as the other two are already there.

2018-01-25_19.12.05.png

Circle around to where your redstone torch tower is, and place a piece of redstone on the block that is above the top torch.

2018-01-25_19.16.01.png

Finally, place a redstone torch, so that it powers the repeater when activated.

Final Product

2018-01-25_19.16.32.png

Now this should be your final product, place some redstone and a lever and repeater feeding into the bottom right part of the dropper donut. When you flick the lever, it should open or close, depending on what it was before.

With Some Creativity...

2018-01-25_19.18.20.png
2018-01-25_19.18.26.png

With some creativity, you can create a secret passage, which would look really cool in a single or multiplayer world. That's it to building a 3x3 piston door!