5 Different Tool Kits for Tech Support and Computer/Laptop Deployments

5 useful toolkits, ranging from $5 to $45, which consist of hand tools from Home Depot and Dollar Tree which are useful for tech support. The focus of the kits is on deploying computers and laptops by tech support contractors.

These tools should be able to cover a wide range of issues that technicians could face in these types of deployments, such as opening boxes, cutting open plastic bags, unscrewing computer cases, picking up/grasping screws and screwing down video cards.

Please feel free to mix and match for your preferred tools as you see fit, as these are just suggestions.

1. Stanley 6-in-1 Screwdriver: Includes (2) nut drivers and (2) standard and (2) Phillips tips: $3

2. Anvil Snap-Off Utility Knife: Fits 9mm blades: $1.50

3. Stanley 6 inch needle nose pliers: Includes built-in wire cutter: $3.50

4. Canvas Tool Apron: For storage and transportation: $1.50

Total cost: $9.50

1. HDX 6-in-1 Screwdriver: including a #1 Phillips bit, a #2 Phillips bit, a 3/16 in. flathead bit and a 1/4 in. flathead bit. Both ends of the shaft can be used as 1/4 in. nut drivers when the bits are removed: $5

2. Wiss All Purpose Shears: The scissors feature soft comfort grips with an oversized, high-leverage bottom ring for easy use. The serrated lower blade grips materials securely to keep cuts even: $7

3. Anvil Locking Needle Nose Pliers: Quick release lever disengages the lock allowing the pliers to slide free of the work surface, knurled adjustment knobs is easy to grip and adjust, dipped grips wipe clean of dirt, ergonomic handles reduce hand fatigue, built-in wire cutter at the base of the jaw: $4

4. Canvas Tool Pouch: For storage and transportation: $4

Total Cost: $20

1. Husky 6-in-1 Screwdriver: features a #1 Philips tip/a 3/16 in. slotted tip, 1 bit features a #2 Philips tip/a 9/32 in. slotted tip, 1/4 in. and 5/16 in. nut drivers are built into the shaft: $7

2. Wiss Metal Snips: The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting: $10

3. Husky 6 inch Needle Nose Pliers: Lower handle gripping zone for better control and leverage: $9

4. Small Tool Bag: For storage and transportation: $6

Total Cost: $32

1. Husky Ratcheting Screwdriver: The Husky 10-Piece Ratcheting Screwdriver Set includes 3 Slotted bits, 3 Phillips bits, 4 Tamper Resistant TORX bits. A patented ratchet provides smooth ratcheting action and has greater durability performance: $10

2. Milwaukee Aviation Snips: The forged blades deliver up to 10X more cuts than cast blades. Bolt Lock prevents the blades from loosening and a durable chrome plating provides rust resistance. A metal lock secures the tool for storage and easily operates with 1 hand: $14

3. Husky 8 inch Needle Nose Pliers: Lower handle gripping zone for better control and leverage: $11

4. 12 Inch Tool Bag: For storage and transportation: $10

Total Cost: $45

If finances are tight, buying tools from Dollar Tree is an option. Please note that these are not high quality tools, as the manufacturer uses metal alloys that are softer, but they will do in a pinch if you do not have a lot of money and/or you need tools quickly for a contract:

1. Set of 4 screwdrivers: Each pack comes with one 4-in. and one 1.5-in. flathead, and one 4-in. and one 1.5-in. phillips-head screwdriver: $1

2. Multi-bit screwdriver: Conveniently stored inside the handle are a wide assortment of screwdriver tips (2 different sizes each of flathead and Phillips), socket adapters, and a set of 5 sockets: $1

3. Kitchen scissors: $1

4. Needle nose pliers: $1

5. Drawstring Backpack: For storage and transportation: $1

Total cost: $5