A 3D Printed Front End Loader

My new heavy machinery vehicle, similar structure to to the Excavator I've uploaded since July:

And this time I've simplified some structure of the arms. Reduce some freestanding bolt as possible. But both retained playability.

My black filament ran out while printing the blade, so I used a green instead.

Here is a graphic of color classify: You can place the same color sets together in one plate.

Assemble the two retroreflectors on the cabin.

Set the seat.

And steering wheel as well.

Connect the two side terraces with ladders, cylinders. (The terraces should be yellow)

Insert into the side bulges on the body.

Assemble rear lamps and number plate on the beam. Add it to the tail.

Then cover the cap.

Bolt-on the pressure.

Insert the pressure stick and connect it to the fore boom. (All the size of the nails/nuts are same)

Connect the blade next.

Directly insert the main body into the front body. (Then cap the body nut)

Put Axles into the hubs.

Insert inner axle at the other side.

Then assembled wheels.

Quick assembled bulldozer, if you think it not chanllenging enough here are some packages more complicated:

http://www.shapetizer.com/design/23506110061005920... http://www.shapetizer.com/design/9960507031095332...

If you like it, follow us on twitter or facebook to find more funny 3D printed stuffs：

https://twitter.com/Shapetizer

https://www.facebook.com/Shapetizer-44161327934874...