A Cute Place to Store Your Things

by cheli_xx in Craft > Paper

430 Views, 5 Favorites, 0 Comments

A Cute Place to Store Your Things

20171213_153929.jpg
20171213_153937.jpg

(Disclaimer: I know you're supposed to use origami paper but I didn't have any close by so I just used regular colored paper)

Heyy I'm Cheli_xx and I am a 10th grade engineering student at the Ann Richards School for Young Women Leaders(I know, mouthful right?) But anyways I'm doing a project and I had to make an instructable on something I knew how to do well. So I was thinking to myself "Hmm I'm not really good any at anything" but then I remembered that I could make a little origami box, so I did. Here it is guys. I'm going to teach y'all how to make an origami box.

Get 2 Sheets of Origami Paper

20171213_143816.jpg

So you need to get not one but two sheets of origami paper, because you want to make the lid right? Of course you do, it wouldn't be a box without it. Also it doesn't matter the color. It's whatever you prefer

(Optional) Cut Your Piece of Paper Into a Square

20171213_144809.jpg
20171213_144917 (1).jpg

Take a corner from the shortest side of the paper and fold it towards the long side of the paper. It should look like the picture.

When you're done folding, cut off the excess paper at the bottom

(When folding make sure that the edges are lined up perfectly!!)

Fold Your Paper Into Squares

20171213_150514 (1).jpg

Fold your paper in half vertically and then fold in half horizontally

Fold the Corners Toward the Center

20171213_151749.jpg

Fold in Half Horizontally

20171219_112906.jpg

Fold in half horizontally with the corners inside

Fold Sides Towards the Middle

20171213_151915.jpg
20171213_152013.jpg

Pull Two Corners Out From the Center

20171213_151937.jpg
20171213_152100.jpg
20171213_152118.jpg
20171213_152135.jpg
20171213_152134.jpg

It should look like the last picture above

Push the Corners In

20171219_115707.jpg
20171213_152209.jpg
20171213_152231.jpg
20171213_152444.jpg

This is where it kind of gets complicated. You are going to push a certain side in and it will create a crease and it should look like the last picture. You are going to repeat in for the other corner you pulled out

Push the Flaps Into the Box

20171219_120451.jpg
20171213_152343.jpg
20171213_152545.jpg

You are now complete with the bottom part of the box

Repeat Step #3 and #4

20171213_152945.jpg
20171213_150514 (1).jpg
20171213_151749.jpg

Fold Horizontally

20171213_153538.jpg
20171213_153626.jpg
20171213_153711.jpg

The lid of the box of course has to be bigger so it can cover the bottom. So when you're done folding horizontally you're going to fold the sides in but leave a little space in the middle. Look at the picture above for an example

Repeat Step #7 and #8

20171213_153824.jpg
20171213_153738.jpg
20171213_153844.jpg

This Is What the Lid Should Like When You're Done

20171213_153911.jpg

You're Done!!

20171213_153929.jpg
20171213_153937.jpg

Hey you did it!! Congrats! Now you have a cute little place to store your things. Have fun don't do too wild! :))