A Designer's Dream Desk

This is an interesting project, to keep dreams in mind and achieve what you want. This is my work desk, and I like it ... even though it's so tiny. Enjoy this instructables, thanks for your visit .

popsicle sticks

gripper

cutter

glue

paintings

aluminum tape

staples

sandpaper

First we will make the desk with an ice cream stick, with a measurement of 3 cm, we will cut it with the tweezers or the cutter.

After this, we sand the edges for a better finish.

For the legs of the desk, we will cut pieces of 9 mm long by 2 millimeters thick, we will cut 2 and for the drawers, we will cut four pieces of 9 mm long by 5 mm wide; and we will glue them after sanding them, as seen in the image.

For the drawer we will use a small piece of 3 x 3 millimeters and we will glue it a little on the outside, as seen in the image. This is an open cabinet.

For the Mac we will use a piece of 7 x 5 millimeters, we will paint it black and then with a piece of aluminum tape we will cover the back of the piece; ahead we will stick a piece of actetate; for the base we will use a staple, we will bend it until we obtain the base of the Mac. For the tablet we will use a 4 x 3 mm piece and we will also paint it black, with gray edges; and finally for the printer we will use a piece of wood of 4 x 4 millimiters, with the cutter we cut pieces of paper for the printer.