A Duct Tape Stove Pipe Hat
by DuctTapeCrazy in Living > Halloween
2371 Views, 6 Favorites, 0 Comments
A Duct Tape Stove Pipe Hat
This is my version of a Duct Tape Stove Pipe Hat, I made this for a friend.
What You Need
You Need
Duct Tape
Paper
Scissors
Sharpie
Masking Tape
Duct Tape
Paper
Scissors
Sharpie
Masking Tape
Making Duct Tape Sheets
1. Get a piece of paper and cover both sides with duct tape.
2. Cut off the jagged edges.
3. Put duct tape on the edges.
4. Repeat 1-3 and make 3 sheets.
2. Cut off the jagged edges.
3. Put duct tape on the edges.
4. Repeat 1-3 and make 3 sheets.
Making the Tube
1. Duct Tape two sheets together fat side.
2. Put a piece of tape across the other fat side and put the two sheets two your head and join them with the tape.
3. Fill in any gap with tape.
2. Put a piece of tape across the other fat side and put the two sheets two your head and join them with the tape.
3. Fill in any gap with tape.
Making the Brim
1. Get the other sheet and draw the outline of a hat's brim onto it.
2. Cut it out.
3. Center your tube in the middle of your brim and trace it with the marker.
4. Poke a hole in the center.
5. Cut the holl straight across, side ways, diagonally
6. Put tape onto each strip and tape them into the tube.
2. Cut it out.
3. Center your tube in the middle of your brim and trace it with the marker.
4. Poke a hole in the center.
5. Cut the holl straight across, side ways, diagonally
6. Put tape onto each strip and tape them into the tube.
The Top
1. Lay strips along the top and cover the hole.
2. Lay more strips across the top.
3. Wrap and band along the tape on the side.
2. Lay more strips across the top.
3. Wrap and band along the tape on the side.
Done!
Done! Now go show off!