A Google Sketchup Skatepark

by Furloy in Circuits > Computers

10110 Views, 3 Favorites, 0 Comments

A Google Sketchup Skatepark

Picture 45.png

Google sketchup is a google product that was designed as a 3-D modeling program.
I will show you how to use it to make a halfpipe

Platform

Picture 9.png

Picture 10.png

Picture 11.png

This is the step that shows what the base of the ramp will be

Making It 3D, Putting Some Life Into It

Picture 14.png

Picture 15.png

Picture 16.png

Picture 17.png

Picture 18.png

Picture 19.png

Picture 20.png

here is what to do to make it 3-D.
You will use the push/pull tool and the curve tool.

Delete the Lines

Picture 22.png

Picture 23.png

Picture 21.png

there should be one vertical line on each side, use the erase tool to delete them
if something bad happens stop and go to edit>undo erase

Coping

Picture 24.png

Picture 25.png

Picture 26.png

Picture 27.png

Picture 28.png

This is how to make the pipe that is on the edge.

Copy and Paste

Picture 30.png

Picture 31.png

Picture 32.png

Picture 33.png

Picture 34.png

Picture 36.png

Make the other half, this step uses the rotate tool, line draw, and move tool

Finishing Touches

Picture 37.png

Picture 41.png

Picture 42.png

Picture 44.png

Picture 45.png

Finish it up!
you will use the paint tool, and the mouse tool.

And Done!

Picture 46.png

GOOD JOB SOLDJA!! YOU SUVIVED THE MISSION!!!
credit to google for the software, good job google peeps!