A Simple Jewerly Box

Hailz everybodie !

I built this jewerly box few years ago out of scrapwood to train me making dovetails (actualy those are my first dovetails). I used scrap oak and scrap ipé to make this box. It turns realy nice. I don't have lots of pictures i'm sorry for that.

- oak
- ipé
- handsaw
- chisels
- handplane
- measuring tools
- finishing products
- and that all I think

I began to make the dovetails joints using my hand saw and chisels. Only two tails needed. Make sure everything is square and glue it all. Mhm, before gluing I made a groove all around inside to insert a piece of plywood.

I glued 2 pieces àf ok together and cut it to the size of the box. I made a rabbet all around and glued 4 pieces of ipé with miter joint.

Sand it all and apply any finishing products you want. I use simple varnish here. Then, I glued a piece of red felt to make it prettier.

That's done !

Thanks for watching and make sure to visite my youtube channel https://www.youtube.com/channel/UCu5Fup2DiqoDILq2hois-tA and my website for more woodworking projects. See ya guys !