AC Hidden Blade With Simple Material

Played AC, obsessed with its amazing hidden blade

wanna make it

don't have the needed material :-( :-( :-( I know how it feels so lets do it with household waste

Materials needed

1 Long thread

2 Well crow/Shoe lace

3 paint (Optional)

4 card board box

5 ice cream stick

Alright !! lets get ahead

First make a box so that one end is closed and the other is open. Do it with a glue or tape, stick the sides. It is from where the blade will come (the hidden blade container) go with the photo [sorry for the picture :-( ]

Take an ice cream stick, cut it so that it becomes sharp. Color it metallic if u want, go with the picture

sorry again for the pic

This step is a little lengthy but u will do it

at the top of the blade holder make a hole.Now insert a string, do the same with the blade but the hole must be at the center (it depends on how much blade u want to take out. If the stick is small make a hole at the last if not make it at the center) now tie the the blade inside the box through the hole. On the holder make sure it is lose so when pressure is exerted the blade is left suspended in the air. go with the picture

After everything is done, flick your wrist with a little force so that the blade comes out BOOM. It works like this:-

When you apply the force the blade comes out from its case but doesn't fall because of the sting attached. I know you already knew this but I wrote the working of the blade 'cause why not??

There you go your simple yet exciting hidden blade for the cosplayer inside you...

enjoy !!!!!