AMD CPU Cooling Fan Onto a PowerColor ATI Radeon X1650 Graphics Card.

by hardwyrd in Circuits > Computers

7466 Views, 3 Favorites, 0 Comments

AMD CPU Cooling Fan Onto a PowerColor ATI Radeon X1650 Graphics Card.

DSC00299.JPG
I have this old PowerColor ATI Radeon X1650 graphics card that still works. But the main problem is that the cooling fan is not sufficient and it pretty much get stuck always. I found an old cooling fan for an AMD Athlon 64 CPU and used that instead.

Remove the Old Fan and Heatsink.

DSC00300.JPG
Gut out the old fan from the PowerColor graphics card, and detach the heat sink from the circuit board

Screw the AMD fan onto the heatsink. Tighten the heat sink fins around the screws using a long-nosed plier to secure the screws tightly.

Mount the Heatsink Again

DSC00301.JPG
With the AMD fan screwed tightly to the heatsink, mount the heatsink back to the circuit board.

Snip the AMD Fan Power Connector

DSC00302.JPG
DSC00303.JPG
The fan power connector for the old PowerColor fan is smaller compared to the AMD cooling fan's. Snip out the AMD fan's power connector and replace it with the fan connector from the old fan.

Attach the Old Fan

DSC00303.JPG

Test the Fan.

DSC00304.JPG
Using a DC power supply, test if the fan works.

Mount the Newly Assembled Graphics Card to the Motherboard.

DSC00306.JPG

Boot the System.

DSC00310.JPG

More Pictures

DSC00311.JPG
DSC00309.JPG
DSC00308.JPG
DSC00307.JPG