AMS Lite Style Toilet Paper Holder

Print time: 26.1 hours. Material needed: 628g of PETG (or your preferred filament ).

This is a toilet paper roll holder modeled after the Bambu AMS Lite, available in two versions:

1.The A1 version, recommended by the designer for printing. It features a support shaft diameter of 38mm, which is 75% of the actual AMS Lite's size.A1- 75% size of ams lite- 0.2mm layer, 2 walls, 10% infill

2.The A1 mini compatible version, with a support shaft diameter of 29mm, scaled to 50% of the actual AMS Lite's size. This version might look a bit small when holding standard-sized toilet paper rolls, but it can still accommodate them.A1mini-50% ams lite size- 0.2mm layer, 2 walls, 10%infill

I've designed a hole on the support shaft where you can thread filament through, allowing it to "pretend" it's an AMS Lite. The toilet paper roll I used for fitting has a diameter of 110mm, a width of 110mm, and a core diameter of 40mm. Visually, it creates a well-proportioned look.

I've also designed an outlet bracket for the toilet paper to prevent it from unrolling excessively and causing waste.

If you like this somewhat quirky/playful model, feel free to follow my account! I'll continue to share a variety of models, and you might just find something else you like!