AP4 K`nex Gun by Oblivitus
by Oblivitus in Living > LEGO & K'NEX
5893 Views, 8 Favorites, 0 Comments
AP4 K`nex Gun by Oblivitus
K'nex Gun Name: AP4 (Assault Pistol 4)
Description: This is a small, sturdy k'nex gun that works flawlessly. This instructable will show you how to make the AP3, the AP4 mods are on step 7.
Influences: I designed the entire gun except for the back handle, which I took from Killerk's Magnum and then I modified it.
Power: 3/10
Accuracy: 6/10
Rate of Fire: 7/10 (cock and fire)
Size: 7"(inches)x11"(inches)
Capacity: 9 rounds (6 when attaching pre-loaded clip)
Features: AP1:Realistic Trigger, AP2:Detachable Clip, AP3:"Iron" Sights, AP4:Safety
1: AP4
2: AP3
3: AP2
4: AP1
You can build the AP1, 2, 3, or 4 depending on how many parts you wish to use. NOTE: THE AP4 PICTURES ARE ON STEP 7.
Description: This is a small, sturdy k'nex gun that works flawlessly. This instructable will show you how to make the AP3, the AP4 mods are on step 7.
Influences: I designed the entire gun except for the back handle, which I took from Killerk's Magnum and then I modified it.
Power: 3/10
Accuracy: 6/10
Rate of Fire: 7/10 (cock and fire)
Size: 7"(inches)x11"(inches)
Capacity: 9 rounds (6 when attaching pre-loaded clip)
Features: AP1:Realistic Trigger, AP2:Detachable Clip, AP3:"Iron" Sights, AP4:Safety
1: AP4
2: AP3
3: AP2
4: AP1
You can build the AP1, 2, 3, or 4 depending on how many parts you wish to use. NOTE: THE AP4 PICTURES ARE ON STEP 7.
Pictures of the Magazine
1: Right
2: Front
3: Feeder Detached
4: Ammo
This magazine holds 9 rounds. (6 when detached, see step 6)
2: Front
3: Feeder Detached
4: Ammo
This magazine holds 9 rounds. (6 when detached, see step 6)
Pictures of the Back Handle
1: Left
This is the only part of the gun I took from someone else.
This is the only part of the gun I took from someone else.
Pictures of the Barrel
1: Front Of The AP2
2: The Support Rail With Iron Sights
BTW: Use duct tape at the back of the firing rod.
2: The Support Rail With Iron Sights
BTW: Use duct tape at the back of the firing rod.
Pictures of the Trigger
1: The Trigger
You will need to use some sort of strong glue at the top of the trigger piece connecting the orange 180 degree connector with the tiny black, special connector.
You will need to use some sort of strong glue at the top of the trigger piece connecting the orange 180 degree connector with the tiny black, special connector.
Loading/Cocking/Firing
Loading:
1: Pull the elastics off of the clip feeder.
2: Pull out the clip feeder and fill the clip with gray one slot, one k`nex rod hole, connectors.
3: Replace the feeder and then the elastic bands.
Cocking:
4: Hold on to the top of the clip with thumb pressed on the second blue rod from the front, on the top supports.
5: Pull back the firing rod pull.
Firing:
6: Press the trigger while gripping the clip with other hand.
Remember that if you fire while there are no rounds remaining in the barrel, the top of the feeder will break because it will get hit with the firing rod.
1: Pull the elastics off of the clip feeder.
2: Pull out the clip feeder and fill the clip with gray one slot, one k`nex rod hole, connectors.
3: Replace the feeder and then the elastic bands.
Cocking:
4: Hold on to the top of the clip with thumb pressed on the second blue rod from the front, on the top supports.
5: Pull back the firing rod pull.
Firing:
6: Press the trigger while gripping the clip with other hand.
Remember that if you fire while there are no rounds remaining in the barrel, the top of the feeder will break because it will get hit with the firing rod.
The Detachable Mag
1: Add a few layers of scotch tape to a short (3rd smallest size) blue connector.
2: Put in the side of the mag near its top.
3: Fill mag with 6 rounds
4/5: Pop the back, then the front of the empty mag out of the gun.
6/7: Pop the back, then the front of the full mag into the gun.
8: Pull taped rod out.
You are now fully reloaded!
2: Put in the side of the mag near its top.
3: Fill mag with 6 rounds
4/5: Pop the back, then the front of the empty mag out of the gun.
6/7: Pop the back, then the front of the full mag into the gun.
8: Pull taped rod out.
You are now fully reloaded!
The AP4
1: Left
2: Right
3: Top
4: Bottom
5: Left Side Of Mag
6: Front Side Of Mag
7: Safety
8: Trigger
2: Right
3: Top
4: Bottom
5: Left Side Of Mag
6: Front Side Of Mag
7: Safety
8: Trigger
Need Help?
Message me if you get confused!