ARDUINO GESTURE CONTROL ROBOT

HI! I'M GLAD YOU CHOSE MY PROJECT. MOVE ON TO DO THIS ROCKING PROJECT. WHEN YOU MOVE YOUR HAND FRONT THE ROBOT MOVES FRONT , WHEN THE GLOVE IS MOVED BACK YOUR ROBOT WILL MOVE BACK, AND THE SAME APPLIES FOR RIGHT AND LEFT. THIS IS DONE USING A SENSOR CALLED ACCELEROMETER. CHECK OUT THE VIDEO FOR THE WORKING SAMPLE..

https://youtu.be/JGp9JjD-D24

a) Arduino Uno

b) Transmitter and Reciever (Same frequency)

c) MPU-6050 Accelerometer

d) BO Motars with wheels

e) Motar driver(any)

f) Jumper cables

g) Robot car chassis

h) Arduino A to B cable(for coding)

a) Arduino Uno

b) Transmitter and Reciever (Same frequency)

c) MPU-6050 Accelerometer

d) BO Motars with wheels

e) Motar driver(any)

f) Jumper cables

g) Robot car chassis

h) Arduino A to B cable(for coding)

ALL PRODUCTS AVAILABLE IN AMAZON, FLIPKART AND AVAILABLE IN E COMMERCE SHOPS

Plan your robotic car and connect your recieving system. Take help of the connection diagram for easy reference.

Plan how are you going to design your gloves for operating the robotic car. Make use of the connection diagram and connect your materials with the help of jumper wires. At last stick the done tx system in your gloves from which your going to operate.

Code your project by connecting your arduino UNO to laptop or pc using A to B cable. Code using Arduino IDE app. Link of the app :( https://www.arduino.cc/en/main/software ). Download the app first and connect it.

CHECK THE NEXT STEP FOR THE CODE.

This is the code you have to type (copy and paste) :

#include<MPU6050_tockn.h>

#include<wire.h>

MPU6050 mpu6050(Wire);

long timer = 0;

void setup() {

pinMode(4, OUTPUT);

pinMode(5, OUTPUT);

pinMode(6, OUTPUT);

pinMode(7, OUTPUT);

Serial.begin(9600);

Wire.begin();

mpu6050.begin();

}

void loop() {

mpu6050.update();

Serial.print("accX : ");Serial.print(mpu6050.getAccX());

Serial.print("\taccY : ");Serial.print(mpu6050.getAccY());

Serial.print("\taccZ : ");Serial.println(mpu6050.getAccZ());

if (mpu6050.getAccX() >= 0.70)

{ //FORWARD

digitalWrite(4, HIGH);

digitalWrite(5, LOW);

digitalWrite(6, LOW);

digitalWrite(7, HIGH);

}

else if(mpu6050.getAccX() <= -0.60)

{ //BACKWARD

digitalWrite(4, LOW);

digitalWrite(5, HIGH);

digitalWrite(6, HIGH);

digitalWrite(7, LOW);

}

else if(mpu6050.getAccY() >= 0.60)

{ //LEFT

digitalWrite(4, LOW);

digitalWrite(5, HIGH);

digitalWrite(6, LOW);

digitalWrite(7, HIGH);

}

else if(mpu6050.getAccY() <= -0.60)

{ //RIGHT

digitalWrite(4, HIGH);

digitalWrite(5, LOW);

digitalWrite(6, HIGH);

digitalWrite(7, LOW);

}

else{

digitalWrite(4, LOW);

digitalWrite(5, LOW);

digitalWrite(6, LOW);

digitalWrite(7, LOW);

}

}

Test this wonderful project.

Done by : VEDANTH.K Thank You