Airsoft RPG
airsoft rpg great accessory and its cheap and easy if you choose to make one yours may come out different because i made mine like 3 different times due to leeks and other problems. i will make another on how to make a rocket for it.
- about 3ft of 1/2" pvc
- 2 1/2" T connector
- 1 or 2 1/2" end caps
- 1 1/2" ball valve
- 1 1/2" 45 degree angle connector
- 1 to 2 feet of 1 1/2" pvc
- 1 1 1/2" end cap
- rubber tire valve
- pvc cleaner and cement
- saw
- ask the person at the hardware store on how to get from 1/2" to 1 1/2"
- about 3ft of 1/2" pvc
- 2 1/2" T connector
- 1 or 2 1/2" end caps
- 1 1/2" ball valve
- 1 1/2" 45 degree angle connector
- 1 to 2 feet of 1 1/2" pvc
- 1 1 1/2" end cap
- rubber tire valve
- pvc cleaner and cement
- saw
- ask the person at the hardware store on how to get from 1/2" to 1 1/2"
(Left to right) extra handle for running.............main handle..........trigger (camera made trigger on wrong side its a right handed rpg)........barrel.
Glue in this order or customize to fit you
Glue in this order or customize to fit you
you might want to buy an extra end cap for your 1 1/2" pvc for hole size testing
drill a hole in the end cap that should fit and try to pull the tire valve through so its snug might take a few tries
drill a hole in the end cap that should fit and try to pull the tire valve through so its snug might take a few tries
this is when you ask the guy at the hardware store how to go from 1/2" to 1 1/2" . or find out yourself .
glue together and add whatever you want for sights and other accessories
let dry
fill her up with a air compressor or with a bike pump
load with mini marshmallows,bbs,or what ever else you want
be safe and have fun
let dry
fill her up with a air compressor or with a bike pump
load with mini marshmallows,bbs,or what ever else you want
be safe and have fun