Altoids TF2 Spytron 3000 in 10 Ridiculously Easy Steps!

So this is my first instructable. I hope you like it! PS: read the instructions before crafting (this is very recommended)

supplies list:

• Altoids tin

• cardboard box

• rubber band

• hot glue gun and glue sticks

• marker or pencil

• patience

• scissors

To begin we must get a workspace and grab all our materials and tools, then we may begin.

Snippy snip time!! Cut one of the top panels (witch ever panel that doesn’t have tape, or a tag, or writing, you only need to cut one piece.

Put the tin on the panel and write on it with your pencil or marker

Cut on the drawn lines and try your best so it can glue easily.

Put the cut panel on the tin and see if it fits.

Colour it with your pencil or marker (I used a marker) and draw it to match the TF2 spytron 3000.

Cram the other piece into the tin (or glue it, but I crammed it).

Plug in the glue gun and glue on the panel on the corners. I recommend putting it on the corners on the inside near the edge or it may not shut properly.

Don’t use too much glue or it will break (like mine :.[ Or you could use a different material to make it stick).

Put whatever you want in that rubber band slot (or don’t lol) and paint it if you want.