Altoids Tin Solder Cleaning Sponge

by guitarsandcars in Workshop > Tools

1786 Views, 8 Favorites, 0 Comments

Altoids Tin Solder Cleaning Sponge

0.398491674834870920130724_211735.jpg
0.620759568043525520130724_211849.jpg
it's really simple, just easy to have this.

What You Need

0.0980787757210270820130724_211458.jpg
altoids tin
sponge
marker
scissors
duct tape (optional)

Fit the Sponge in the Tin

0.1417150961878230820130724_211522.jpg
if you have the right sized sponge you don't really need to do anything.

Mark the Back Where You Need to Cut.

0.462444624249153820130724_211537.jpg
0.29556406730145620130724_211718.jpg
Mark The Back then cut the sponge with scissors.

That's It

0.3000211293169706720130724_211917.jpg
its just a some sponge for cleaning your soldering tip. I had to use duct tape to help keep the tin closed, but if the sponge you use is smaller you may not need it.