Altoids Guitar 1.2

by FinchbyFinch in Living > Music

3102 Views, 20 Favorites, 0 Comments

Altoids Guitar 1.2

IMG_0044.JPG
IMG_0047.JPG
IMG_0040.JPG
IMG_0048.JPG
IMG_0036.JPG
IMG_0037.JPG
IMG_0038.JPG
IMG_0045.JPG
I worked on it a bit more today.

I made a new bridge out of an old nail and Dremel-ed notches into it, works GREAT!

i put in the piezo pick up, and i didnt even have to leave the house like i thought i would. i was trying to tune another guitar entirely, when i realized that my tuner wasnt tuning correctly. it was always between 3 and 5 steps off. so i uopened it up to see what could be the issue and... lo and behold theres a nicely sized piezo in there, AND and 1/4th jack. since i couldnt fined anything wrong with the disk that would cause it to be so far off. i concluded that it must be something broken in the circuitry and decided to just hack the whole thing apart and salvage the piezo and jack. 

after a bit of really awful soldering, and few of those screw on wire connector things... VIOLA! i had a piezo pick ready to go. 

I didnt get a chance to get any good strings today, but i did switch down to the bottom two uke strings, and tuned it (roughly) to D and G

Its plugged into a tiny Orange amp, and i have a little bit of overdrive on, just for a grungy, fuzzy sound. 


Heres a link to the first post, if youre interested

https://www.instructables.com/id/My-Altoids-Box-Guitar/

comments/questions/suggestions/criticisms/love declarations/challenges/etc are all warmly welcome :)