Aluminum Longboard Deck

First, I want to give a shout out to the Invention Studio at Georgia Tech. I wouldn't have been able to make this without all of the great resources they provide. http://inventionstudio.gatech.edu/

For this project, I wanted to build a custom longboard which would be truly unique. This Instructable will walk you through all of the steps to design and build your own aluminum longboard, but since the design has not been thoroughly tested and since the safety of the board greatly depends on correct material selection and assembly, I did not provide my plans for my aluminum deck.

The first step is to model the wheels and trucks you

will be using. I used Solidworks. This allows you to make sure you get proper clearance without getting wheel bite or the deck dragging the ground. My deck has 15mm of clearance through 30degrees of lean.

I used a wheelbase of about 32 inches, Deck Width of

9 ½ inches, foot platform length of 23 inches, and a drop of ¾ inch.

With these Dimensions, you can begin designing your deck. I started with the rails, then made the spacers, struts, mounting plates, and platform. Struts are also important to make sure the deck won’t bend into a convex shape when you ride it, and the cross bracing prevents the rails from twisting

FEA is very important to make sure that the deck will

not bend in half when you ride it. Be sure to consider buckling, twisting, and deflection. Be sure to check for buckling in the struts, and don’t forget about dynamic loads and a conservative safety factor.

Now that we are sure that the deck is going

to work, it is time for the fun part, building it!

I cut the pieces out of a single sheet of 6061 aluminum on our waterjet

Remove the parts from the

sheet and assemble them. This step took some filing and pressing to get everything together nicely

The board was designed to be welded together. The

tabs line everything up, and then I used AC TIG welding to stitch weld all the components together. Welding aluminum is a lot harder than welding steel, so after some practice, I got a professional to do if for me

Bolt on the trucks and wheels, and put on the grip

tape. I put the grip tape on as one big piece, then trimmed the edges and holes using a razor blade, this is a tedious process, but really shows of the design of the board.

See how it rides. I was expecting it to have a stiff

ride, which it does, but it is a lot of fun, and extremely satisfying!