Among Us Meeting

You or your kids (if your a parent reading this) may love Among Us. Now a days, you see like every 1 out of 10 people wearing among us shirts or glasses, maybe even holding an Among Us cup; its just so popular, but have you ever thought how you could make an Among Us thing for someone? Well your in luck. This project can be used on a 3D printer, or you can DIY it. I just used Tinker Cad to make this Among Us meeting.

First, I started off with cylinders for the legs. The legs have an 8 mm diameter and they are 20 mm high. Make 2 legs. Then, work on the body. I used another cylinder and made it 40 mm high, 31 mm wide, and 23 mm thin. Add 2 semi-spheres on the among us character. The width of the semi-sphere is 31 mm and the thickness is 22 mm. Put the first sphere on the front of the body for the eyes and the other sphere for the top of the head. Then, for the backpack, use a round roof, and make the roof 14 mm thick by 20 mm wide, the length is 20 mm. Now, to color code it. Make your among us character the color you want to make the Among Us character.

First, make the cone with a 20 mm diameter and 20 mm high. Next, make the top piece with a cylinder. Make the cylinder 2 mm thick with a diameter of 50 mm. Then, make the button out of a cube that is 17 mm on each side.

Now, here's the easy part; copy and paste your last design of your Among Us character. I did 4 because some of the characters were murdered by the imposter. You may need to change your characters colors up so you don't have the same orange color, that would be a hard game; knowing that orange was the imposter, but there's 4 oranges. You can add more detail than this, but this is all that I wanted to do with this project, but you can use it on a 3d printer if you would like.