Android 3D Printer Control

A simple tutorial about Reprap Control android application.

You can find the application named Reprap Control on play store :

https://play.google.com/store/apps/details?id=com....

Source and release :

https://github.com/devmel/ReprapControl-Android

Once installed, tap "OPEN".

Change parameters like BaudRate according to your machine.

Tap "PORT SELECT" to choose in which way you want to connect.

Reprap Control provides three ways, I will use USB OTG direct connection.

Tap "USB", select your port, then click on Android's "Back" button to return to the previous page.

A dialog box will appear, of course, press "OK", this dialog box will appear twice, you press "OK."

Press "CONNECT".

On success the bottom of the screen display a bunch of firmware information captured by the printer.

Tap on "AXIS" to prepare the printer (home axis, set temperature...)

Tap on "SD CARD".

Select the gcode file to print (here i2supp~1.g).

It takes few seconds to load and tap on "Start/Resume".