Arduino Display Lamp
The circuit
The basic idea of this project is to project lights on artwork. As this being said the main user for this project are artists. In my project, I use different sizes of boxes with different shapes.This overall creates different light patterns to reflect on the artwork giving the artwork a finishing touch. Indeed by creating different patterns will help create a different atmosphere for the exhibition. In this project, I use Arduino blink to innovate into this project.Overall tuis hows that this project is suitable for beginners because it only uses basic idea of blink.
What You Need
For the device:
1.Arduino UNO x1
2.Led A resister x1
3.breadboardx1
4.Wire x2
5.USB Transmission line for Arduino UNO x1
6.computer x1
In the computer
1.Arduino program
Others
1.Box x1[you can use glass too]
2.pair of scissors
Procedures
1.Create the circuit,if you are struggling as a beginner you may take a look at the picture above about the circuit, it'll be easier [I only use one LED light, of course, you can use more however I recommend using only one so then you can control the light better but you can always use more to create a layered look]
2.Once you create the circuit scroll up to the code section and copy the code to your Arduino program.[make sure you change the input]
3.Now you have done 50 percent of the work after that take your scissor out and cut the box like the picture[Or you can cut different holes on the box,up to you,depend on how you want your pattern to be]
4.take your transmission line and upload your code on the arduino program to your Arduino UNO.
5.take your box and cover the part you led light shine
6.place the device under you art work and close the light