Arduino Nano - MCP9808 Temperature Sensor Tutorial

MCP9808 is a highly accurate digital temperature sensor ±0.5°C I2C mini module. They are embodied with user- programmable registers that facilitate temperature sensing applications. The MCP9808 high-accuracy temperature sensor has become an industry standard in terms of form factor and intelligence, providing calibrated, linearised sensor signals in digital, I2C format. Here is the demonstration with Arduino Nano.

1. Arduino Nano

2. MCP9808

3. I²C Cable

4. I²C Shield for Arduino Nano

Take an I2C shield for Arduino Nano and gently push it over the pins of Nano.

Then connect the one end of I2C cable to MCP9808 sensor and the other end to the I2C shield.

Connections are shown in the picture above.

The Arduino code for MCP9808 can be downloaded from our GitHub repository-DCUBE Store

Here is the link for the same :

https://github.com/DcubeTechVentures/MCP9808

We include library Wire.h to facilitate the I2c communication of the sensor with the Arduino board.

You can also copy the code from here, it is given as follows:

// Distributed with a free-will license.

// Use it any way you want, profit or free, provided it fits in the licenses of its associated works.

// MCP9808

// This code is designed to work with the MCP9808_I2CS I2C Mini Module available in Dcube Store.

#include

// MCP9808 I2C address is 0x18(24)

#define Addr 0x18

void setup()

{

// Initialise I2C communication as MASTER

Wire.begin();

// Initialise Serial Communication, set baud rate = 9600

Serial.begin(9600);

// Start I2C Transmission

Wire.beginTransmission(Addr);

// Select configuration register

Wire.write(0x01);

// Continuous conversion mode, Power-up default

Wire.write(0x00);

Wire.write(0x00);

// Stop I2C Transmission

Wire.endTransmission();

// Start I2C Transmission

Wire.beginTransmission(Addr);

// Select resolution register

Wire.write(0x08);

// Resolution = +0.0625 / C

Wire.write(0x03);

// Stop I2C Transmission

Wire.endTransmission();

}

void loop()

{

unsigned int data[2];

// Starts I2C communication

Wire.beginTransmission(Addr);

// Select data register

Wire.write(0x05);

// Stop I2C transmission

Wire.endTransmission();

// Request 2 bytes of data

Wire.requestFrom(Addr, 2);

// Read 2 bytes of data

// temp MSB, temp LSB

if(Wire.available() == 2)

{

data[0] = Wire.read();

data[1] = Wire.read();

}

// Convert the data to 13-bits

int temp = ((data[0] & 0x1F) * 256 + data[1]);

if(temp > 4095)

{

temp -= 8192;

}

float cTemp = temp * 0.0625;

float fTemp = cTemp * 1.8 + 32;

// Output data to screen

Serial.print("Temperature in Celsius : ");

Serial.println(cTemp);

Serial.println(" C");

Serial.print("Temperature in Fahrenheit : ");

Serial.println(fTemp);

Serial.println(" F");

delay(500);

}

MCP9808 Digital Temperature Sensor has several industry level applications which incorporate industrial freezers and refrigerators along with various food processors. This sensor can be employed for various personal computers, servers as well as other PC peripherals.