Arduino Potentiometer+RGB LED Van Gogh Escape Room Light Show

In this escape room, I take famous artist Vincent Van Gogh's iconic color scheme and let those colors shine with an RGB LED.

1 Arduino

1 breadboard

1 potentiometer

1 RGB LED

1 Resister

10 Jumper Cables

• The code you will be putting in will control the RGB LED and the potentiometer

• Once the simulation is started the potentiometer will be able to be turned
• Turning all the way to the left will make the RGB LED shine yellow
• Turning all the way to the right will turn the RGB LED shine blue

• Place the RBG LED on e4-e7

• Place a resister on b5 and a negative line on your breadboard

• Red jumper cable from 12 to b4

• Blue jumper cable from 13 to b6

• Green jumper cable from -11 to b7

Potentiometer

• Place potentiometer on e16 to e18

• Black jumper c16 to the negative line on the breadboard

• Green jumper cable from c17 to A0 on the Arduino

• Red jumper c16 to the positive line on the breadboard

• Connect a red jumper cable from 5V to the positive line on the right side of the breadboard
• Connect a black jumper cable from the GRD to the negative line on the right side of the breadboard

• Connect the left and right sides of the breadboard by placing a red jumper on the left positive line to the right positive line
• Do the same with the negative but on the negative lines on the breadboard