Arduino the Hunted Game

The Hunted Game
This project helps create a game called the hunted. One person will wear the arduino with an IR Sensor, 3 LED's and a Buzzer. You will start out with 3 lives represented by the LED's. Once shot 3 times your dead. The hunter will use a remote control from home, universal works best. Play with a friend that has it as well and you can play IR Tag.

Needed Components:

1x Breadboard
3x LED's
1x Arduino
1x Speaker
3x 220 Ohm Speakers
1x 100 or 220 Ohm Speaker
Wires

Components can be found at http://egrobotics.com/store/
This Project uses and Arduino Board and IR Add-on Kit

www.EGRobotics.com

The Code:

#define IRsensorPin 6
void setup(){
  pinMode(3, OUTPUT);
  pinMode(8, OUTPUT);
  pinMode(9, OUTPUT);
  pinMode(10, OUTPUT);
  digitalWrite(10, HIGH);
  digitalWrite(9, HIGH);
  digitalWrite(8, HIGH);
  delay(10000);
}
void loop(){  if (digitalRead(IRsensorPin)==LOW && digitalRead(8) == HIGH){
digitalWrite(8, LOW);
    delay(5000);
  }
  if (digitalRead(IRsensorPin)==LOW && digitalRead(8) == LOW && digitalRead(9) == HIGH){
    digitalWrite(9, LOW);
    delay(5000);
  }
  if (digitalRead(IRsensorPin)==LOW && digitalRead(9) == LOW && digitalRead(8) == LOW){
    digitalWrite(10, LOW);
    analogWrite(3, 150);
  }      
}

Video: