Armour Airsoft
This is Armour Airsoft Targets
Devistation
The older 6mm MDF targets lasted about a month.
In an effort to make them last longer, I used soda cans to clad them.
In an effort to make them last longer, I used soda cans to clad them.
The Process
Carefully punch a hole in a soda can.
Cut the can in to a sheet to work with.
Use a scribe to mark out the tin.
Cut it out and staple it on to the MDF.
Cut the can in to a sheet to work with.
Use a scribe to mark out the tin.
Cut it out and staple it on to the MDF.
Hang Them
You can bend the tin at the back of the target to form a hook.
This can then be hung on to various surfaces.
This can then be hung on to various surfaces.