Assignment A-Steel Matrix by Jamie Ung

A compilation of the Steel Matrix for Prototyping steel class.

Straight cut and MIG welded to a 90 degree L.

Bent Steel solid tube bar with manual tube bender.

Bent Aluminum bar with manual tub bender

1. Cut 45 degree cuts

2. Mig welded

3. Grinded weld with grinder

4. Sand out welds

1. 90 cuts into 2 pieces

2. Line and mark up pieces

3. Drill hole into both pieces

4. Tap only 1 side, manually

5. Clean/ assemble and screw in fastener