Automatic Fan Controller Based on Temperature With UA741 IC

In today's tech-savvy world, automation has become the buzzword for convenience and efficiency. From smart homes to industrial processes, automation plays a pivotal role in simplifying tasks and optimizing resource utilization. One such area where automation brings immense benefits is temperature control systems. In this blog, we'll delve into the working and construction of an automatic fan controller that utilizes the UA741 IC.

Understanding the Project:

The heart of this project lies in the UA741 IC, a popular operational amplifier known for its versatility and reliability. In this setup, the UA741 serves as a sensor for detecting accurate centigrade temperature. But how does an operational amplifier function as a temperature sensor?

The principle behind this lies in leveraging the temperature-dependent characteristics of electronic components, particularly diodes. As temperature increases, the voltage across a diode experiences a known rate of change. By exploiting this property, we can design a circuit where the output voltage of the UA741 IC is linearly proportional to the Celsius temperature.

CHECK OUT DETAIL POST = techeonics.com

check out the video - https://youtu.be/ziftfAZ4U9U

Parts Required:

Before we delve into the construction process, let's gather the components necessary for building our automatic fan controller:

• UA741 IC: This serves as the temperature sensor in our circuit.
• NPN Transistor BC140: Used for amplification purposes.
• 4.7k NTC Thermistor: The main temperature-sensitive element.
• 4.7k and 47 Ohm Resistors: Required for configuring the circuit.
• 9V Battery or DC Source: Provides power to the circuit.
• 10K Potentiometer: For adjusting sensitivity.
• 1N4007 Diode: A common-purpose diode used in various applications

Schematics

Arrange the components on a circuit board in accordance with the schematic diagram.

The UA741 IC should be placed at the center of the circuit. Connect its pins according to the circuit diagram.

the 4.7k NTC Thermistor acts as the temperature-sensing element. Connect it to the UA741 IC in the appropriate configuration.

Install the 4.7k and 47 Ohm resistors, NPN transistor BC140, 10K potentiometer, and 1N4007 diode in their respective positions on the circuit board.

 Connect the 9V battery or DC source to power the circuit.

once the circuit is assembled, test its functionality. Adjust the potentiometer to calibrate the sensitivity of the temperature sensor.

Finally, connect the output of the circuit to control the speed of a fan based on the detected temperature.

CHECK OUT DETAIL POST = techeonics.com