Awesome April Fools Prank.... (Buzzer Chair)

by Nextraker in Living > Pranks, Tricks, & Humor

5127 Views, 8 Favorites, 0 Comments

Awesome April Fools Prank.... (Buzzer Chair)

Putting everything back together 1.bmp
Putting everything back together.bmp
This is the Prank that will make you famous or the most hated..... Either way you will be known..... Follow these simple steps to booby trap one of your friends Chairs.....

Watch the Instructional video by clicking on the link below..... Its a must watch!!!! Enjoy!!!!!

http://www.break.com/usercontent/2009/3/How-To-Prank-Your-Room-Mate-686944.html

Materials!!!!

Chair Pic.bmp
Buzzer.bmp
Battery Holder.bmp
Wire.bmp
4 ring terminals.bmp
For this prank you will need the following Items.....
  • Victim's Chair
  • Buzzer
  • Battery Holder W/ Batteries
  • Wire
  • 4 Ring Terminals

Additional items....(not as important)

Tape
Scissors
Soldering Iron
Glue

Watch The Video
http://www.break.com/usercontent/2009/3/How-To-Prank-Your-Room-Mate-686944.html

Remove!!!!

Remove Back Rest.bmp
Remove Padding2.bmp
  • Begin by removing the back rest from the chair, also if theres any plastic padding you might want to remove that as well, you basically wanna strip the chair to the bone....(Jk) but seriously take off as much as you can....

http://www.break.com/usercontent/2009/3/How-To-Prank-Your-Room-Mate-686944.html

Attach!!!!!

Solder Rings to Wires 1.bmp
Tape Together.bmp
Set Them Apart.bmp
Back Rest Bends.bmp
  • Next, you need to attach the Ring Terminals to your wires, You will 4 wires (it helps if they're different colors) They should be about 2 feet each.... (or depending on the size of the chair)
(use tape)
*Place the 2 + Wires and 2- wires Apart, so when the back rest bends, the wires Connect Causing the Buzzer To go Off.....

http://www.break.com/usercontent/2009/3/How-To-Prank-Your-Room-Mate-686944.html

Connect!!!!

Connecting Wires To Wires.bmp
Connecting Wires To Wires 1.bmp
Solder Rings to Wires.bmp
Buzzer below Arm Rest.bmp
Switch On.bmp
  • Run the wires Down....
  • Solder 2 to the buzzer and 2 to the Battery Holder....
*Tape the Buzzer Under the Arm Rest
*Tape The Battery Holder Below The Chair

(don't forget to leave the switch on)

http://www.break.com/usercontent/2009/3/How-To-Prank-Your-Room-Mate-686944.html

Set Up (Complete) Prank Time!!!!!!

Putting everything back together.bmp
Putting everything back together 1.bmp
Putting everything back together 2.bmp
Putting everything back together 4.bmp
Chair Done.bmp
  • Finally just put everything back together..... The plastic Padding will help they wires.....
  • If you Play it Cool You can really Scare the Crap out of anyone.....

*Chairs Vary, so results might not be the same, but you get the idea..... now go out there and Prank someone......

Check out the Instructional video, by clicking on the link below.... It will show you how it works....
http://www.break.com/usercontent/2009/3/How-To-Prank-Your-Room-Mate-686944.html