Awesome Binder Wings

These wings may not help you fly, but they look pretty cool in motion! I discovered this project While thinking about what I could make with a binder. Pretty weird, right? Let me show you how to make them!

Paracord. One piece, 145cm, two pieces, about 80cm, a binder, and an X-Acto knife.

Mark a line with a straight edge (I used a meter stick) on the second ring. Then mark an “x” on the edge of the binder. Make sure to do this on both ends!

Use the X-Acto knife to cut a hole in the binder where the “x” is.

Loop the cord around the edge and through the hole then tie it. remember to do this on both sides!

Pull the string through the bottom two rings.

Cut holes by the top and bottom ring (4 holes in all).

Thread the two shorter paracords pieces through the holes you just made. Then tie the ends together.

Pull the string on the back.

Tip: Use a lighter to bond the paracord together!