BBQ Table

BBQ Table made from table top that was found in a skip, bbq had been left out for scrap man by a neighbour, legs were claimed from an old table.

I've started by marking out hole required with the bbq lid. Also attached some wood underneath the table top for the legs to sit against.

I've cut the hole out with a jig saw, far from a profestional cut. Then screwed 4 screws into the side to rest the bbq in the hole and keep it from touching the wood for obvious reasons.

BBQ sits in nicely with a gap all the way round, winding the screws in or out let the bbq drop or be raised slightly.

still need to sand the table for painting and try salvage a new lid or fix a better handle, I'm thinking of welding a spanner for a handle. Check back.