BMX Bike

We renewed an old BMX from our project make classroom by taking it apart removing the paint repainted it, replaced a few bolts and put it back together so the old BMX would be as good as new.

• BMX parts
• Wrench
• Bike grease
• Bolts
• T-Handle
• Acetone
• Paint Remover
• Sandpaper
• Spray Paint Primer
• Matte Black Spray Paint
• Exact-o knife

We started out by disassembling out BMX Bike.

Then, we removed the paint from the bike by spraying the bike with acetone but, that didn't work so we sprayed it with paint remover and let it sit overnight and scraped the remaining paint off with sandpaper.

Next, we sprayed the bike with spray paint primer and then we used a matte black spray paint to repaint the BMX Bike and then we left it out to dry.

Finally, we put the BMX Bike back together and we had to replace a few bolts but we also never received our wheels so we didn't completely finish it but it wasn't on us it was on Amazon for never shipping our wheels to us.