Baby Toy Lanyard
Here is a way to make a simple lanyard for baby toys or pacifiers.
Cost $2.00 each.
Little sewing skill needed.
Cost $2.00 each.
Little sewing skill needed.
Cut and Melt
Cut ribbon of choice to around 3 feet. Melt the ends if it is a type of ribbon that will fray.
Small Loop
Sew a small loop. About 1/2 inch wider than the ribbon.
Sew a Big Loop on the Other End
It should be about 1/2 inch bigger than the toys you will connect.
Use
To attach the toy:
1 run the ribbon around or through the toy
2 feed the big loop through the little loop
3 run the ribbon around carrier or whatever it's attaching to
4 feed the toy through the big loop
For safety make sure that the lanyard is too short to strangle the child and what it's attached to cant be pulled over on them. Use at your own risk.
1 run the ribbon around or through the toy
2 feed the big loop through the little loop
3 run the ribbon around carrier or whatever it's attaching to
4 feed the toy through the big loop
For safety make sure that the lanyard is too short to strangle the child and what it's attached to cant be pulled over on them. Use at your own risk.