Ballistic Upgrade for Canadian Forces

Step by step pictures for installing Ballistic upgrades for the Canadian Forces helmet.

Locate the three screws holding on chinstrap, and use a small flat head screw driver to remove them.

Remove brown sweatband by undoing Velcro and sliding it out.

Next remove the harness, and then remove the foam center piece.

once everything is out, CLEAN THE INSIDE EXTREMELY WELL!!! 

I used chalk to out line where I wanted the pads to go. 

Once you know where you want them install the velcro strips or circles (I ran out of velcro so I just taped the center piece until tomorrow when I can install it!).

Insert pads. ***EDIT*** PLACE GREEN SIDE IN. GREEN SIDE IS THE VELCRO SIDE, AS BLACK SIDE WILL NOT STICK TO THE VELCRO ***EDIT***

Screw in the Chin strap, and try it on!!

Use velcro strips to cam cover/scrim nets.

Enjoy!!!