Balloon Dog Tutorial
This tutorial will teach you how to make a ballon dog!
Supplies
Materials: Balloons (long ones)
Tools: Balloon Pump
Step 1: Stretch the balloon a few times
Step 2: Place the balloon end onto the pump and push in so the balloon coverers about one centimetre over the pump.
Step 3: With one hand hold the ballon that’s connected to the pump so it won’t slip and with the other hand push the end of the pump back and forth.
Step 4: Carefully take the balloon off the pump and tie the end of the balloon.
Step 5: Now you have an inflated balloon, to make a balloon dog first step is to twist about 2 and ½ inches of the end of the balloon.
Step 6: Next twist two 2 ¾ inch parts behind the first one. Take the two three-inch pieces and twist them together at least three times so that they resemble ears.
Step 7: About 4 inches away from the head fold the balloon and twist at 2 - 3 inches at least three times.
Step 8: Do the same thing listed in step 7 but adjust torso spacing to your liking. Decorate your dog and it's complete!