Base Helmet With Raw Plaster Casting

by ezarate in Craft > Costumes & Cosplay

6287 Views, 95 Favorites, 0 Comments

Base Helmet With Raw Plaster Casting

CAM00679.jpg
CAM00554.jpg
CAM00656.jpg
CAM00657.jpg
CAM00658.jpg
CAM00660-1.jpg
CAM00662.jpg
CAM00664.jpg
CAM00665.jpg
CAM00667.jpg
CAM00668.jpg
CAM00669.jpg
CAM00670.jpg
CAM00671.jpg
CAM00672.jpg
CAM00673.jpg
CAM00674.jpg
CAM00675.jpg
CAM00676.jpg
CAM00677.jpg
CAM00678.jpg
If you want instructions on how to make the base helmet itself (first step) check out my Rave/tron helmet inscrutable or Google how to make pepakura helmets. 

This is a VERY LOW cost way to make helmet casts, total cost: 15$.
Material:

Plaster of Paris, big jug: $5 hobby lobby
Plaster Cloth: Big Roll: 9$ hobby lobby
Tape: ? 


Im also looking for another cheap material I can make the casts out of, liquid plastic is wayy too expensive,
65-100$ for a big jug. If I find another cheap material to make casts ill post the instructions as well. 

Plaster casts are good but extremely fragile, 4 layers or more are require to make it thick to make sure its stronger. to really make this helmet safe you would have to fiberglass the inside of the helmet and Bondo the outside. 

LATER on if my casts come out good and everything is good I might sell a few base helmet casts on ebay, but this wont happen for a while. 




i'm going to use Silicon rubber as the mold instead of plaster cloth next.

here is an instructional video on silicon molding:

https://www.youtube.com/watch?v=tBClhbrGR7w