Basic Rainbow Loom Bracelet
Step 1
Making sure the pins are facing down , place your first rubber band on the loom.
Step 2
Place the second rubber band on the loom.
Step 3
Continue the pattern until you reach the end of the loom
When you have finished this part it should look like this.
Step 5
Flip the loom over so that the pins are facing up.
Bring the second band up and over to the other side.
Step 6
Bring the third band up and over just like you did with the second band.
Step 7
Continue the pattern until you get to the end of the loom.
When you get to the end it should look like this.
Step 9
Take your clip and attach it to the band on the end . You can now pull the bracelet off the loom. When you have done that you can attach the other end to the clip.
This should be the end result