Basketball Catapult Game

Here is what you need to make a basketball, catapult, and basketball hoop to play with. You need: a 3d printer, a computer, 3d printing filament.

You need: a 3d printer, a computer, 3d printing filament.

First, go to into Tinkercad and go into shapes library and look for Fun and games. Once you do that scroll down until you find the basketball model. Once you find it, put it on the grid and make it 38.10 millimeters on every side. Once you've done that step 1 is done.

First grab a cylinder and tube from basic shapes, and merge them. Then you would would have a holder type thing which you would put the ball in.

Grab a box and ring from basic shapes, and group them together and make the hoop part 38.10 inches on every side. Once you do that step 3 is complete.

Grab a cylinder from basic shapes and make it 150 millimeters high. Next, grab a box and put it under the pole and make it 50 millimeters as the length and width. For the height make it 30 millimeters.

Alright, First of all, you should find the "basic shapes" section. Then you should scroll down for just a bit and you will find a circular figure just like the one shown in the picture. Then you should drag it and align two on each side. Left, and right. Make sure it is wide enough for a stick to fit through (the 4 circles)

First go to "basic shapes" and look for the cylinder block and make it 82.00 millimeters long and make it 3.90 millimeters high. once you do that you are done.